# #################################################################################
# Exceed TurboX Connection Node
# #################################################################################
# Sample response.etxcn
# #################################################################################
#
# Sample response file usage: 
# sudo ./install -s response.etxcn
#
# root privilege is needed to ensure that init boot script can be properly installed
# response file contains Key=value on each line
# The keys are pre-defined, the values must be provided in the response file
# All "are you sure" questions will be answered with "y"
 

install.etxcn.ListenPort=5510
install.etxcn.StartNow=1
install.etxcn.AllowMigrate=0
install.etxcn.MigrateFromThisFolder=/path/to/oldCNfolder
install.etxcn.SaveConnectionNodeIdToFile=1
install.etxcn.CreateETXProxyUser=1
install.etxcn.CreateETXXstartUser=1
install.service.createservice=1
install.service.bBootStart=1
install.register.bAutoRegister=0
install.register.r_serverurl=http://yourserver.fqdn:port
install.register.r_overridehostname=
install.register.r_proxy=1
install.register.r_auth=0
install.register.r_appscan=0
install.register.r_firstdisplay=1
install.register.r_altnameserver=
install.register.r_altnameclient=
install.register.r_additionaloptions=
###  Instead of using the following value you can set ETXSVRRESTTOKEN=tokenstring prior to launching install script
install.register.r_resttoken=
install.register.r_maxtotalsessions=0
install.register.r_maxsessperuser=0
# 12.0.3 or later flags start
install.register.r_allownewsess=1
install.register.r_sshcommand=
install.register.r_kerberoslib=
install.register.r_gsslib=
# 12.0.4 or later flags start
install.register.r_notes=
install.register.r_WebAdaptor=1
install.register.WebAdaptorPort=5510
# 12.5.2 or later flags start
install.register.r_ssrconfig=0
install.register.r_etxauth=0
# 12.5.3 or later flags start
install.register.r_selinuxsetup=1
install.register.r_vdinode=0